• There has been a recent cluster of spammers accessing BARFer accounts and posting spam. To safeguard your account, please consider changing your password. It would be even better to take the additional step of enabling 2 Factor Authentication (2FA) on your BARF account. Read more here.

GP Shifting/Reverse shifting track bike

Alleygator

New member
Joined
Feb 17, 2023
Location
Tracy
Moto(s)
Ducati monster, r1, GSXR
How do you guys feel about GP Shifting/reverse shifting? I’m considering setting it up on my track bike but I ride on the street a lot and I’m worried it might be confusing/ dangerous if I forget on the track.
 
Your concern is valid.

The first thing you should ask yourself is why do you want to change it on your trackbike? What is the benefit you expect? If you don’t need to do it, then don’t. On the flip side, if there is a good reason to do it, then go ahead. Don’t do it because others have done so. Down-shifting to a higher gear when you meant to shift to a lower gear, isn't a big problem, but Up-shifting to a lower gear when you meant to shift to a higher gear can be catastrophic. Back-shifting a bike can not only risk a crash due to loss of traction, but a miss-shift can also mechanically over-rev the engine and cause the valves to contact the pistons.

My experience:
Depending on the track, I discovered that I needed to upshift a couple times per lap in left turns while near maximum lean angle. There just wasn’t enough room beneath the shifter for my foot. I tried shifting early before max lean, and I tried shifting later as I stood the bike up. It just wasn’t working out. When I decided to swap my racebike to reverse-shift, I made a conscious decision to lower risk on and off track by swapping my streetbikes as well (I don't think I've every seen a street ridden Harley with GP shift). It took me a few weeks (riding 7 days a week) to make the swap in my head and stop inadvertently back-shift when riding. This was almost 20 years ago, and I still make the point to remind myself that my motorcycles are reverse shift. On each bike I placed a “Reverse shift” sticker in my field of vision. I also make it a point to keep my foot above the shifter just in case I have a brain fart. My thought process is that the slight delay to move my foot below the shifter will give my brain time to remember the GP shift. Now all that being said, I cannot remember the last time I shifted incorrectly on the street or track.

More than you asked:
I do the sticker and foot placement thing mentioned above because It is slightly more complicated for me due to the requirement that I ride conventionally shifting training motorcycles 2-4 weekends a month in MSF/CMSP novice courses. I used to think my brain remembered that I was riding a training motorcycle, and would then shift conventionally, but I’ve noticed that the shifting skill in my brain is geographically triggered (LOL). While on training ranges my brain shifts conventionally, everywhere else I shift GP. This becomes a problem when conducting advanced courses that require me to ride my own motorcycle. I frequently fail to reverse-shift my personal bikes during class.

TL; DR
I’d only do it if you can swap your streetbike over as well. Mistakes can be very expensive.
 
My track bike is GP shift, my street bike isn’t. On my first track session on a given day I might mis-shift once, maybe twice but that’s it. It really isn’t a big deal to go back and forth.
 
Last edited:
I only rode a reverse shift once. It took a lot of mental thought to make sure I did not seize the TZ250 by being dumb. It was pretty cool.

I see two opinions above. Moto muscle memory is important to me for those moments when I just react and don't have time to think so if I swapped one I would probably swap both.
 
I've considered switching my street bike to GP shift, but haven't felt it was worth the effort, I guess.
 
My race bike was GP shift and really had to be, having a narrow powerband. It was inevitable that I’d have to upshift in a left hander somewhere. Our coach bikes at CSS are GP shift, though with their wider power band, it isn’t really necessary.

One of my street bikes couldn’t be switched, so I just rode standard on the street and GP on the track. It wasn’t a big deal for me to keep it straight. There may be a tiny bit more attention going to shifting than if I never changed patterns, but it’s not been a hindrance.

These days my street bike is also GP shift, so I never really have to change back and forth.

Like Enchanter suggested, be clear about what problem you’re trying to solve by using GP shift. If there is a clear benefit, go for it, but there may not be as much benefit as you think.
 
Thanks for all the good advice. I’m a really tall rider and maybe it is more of a foot peg issue but it’s way easier for me to stomp down so I thought it might make my shifting smoother and faster.
 
Back in the day, I rode a left hand side and a right hand side shift when racing with the AFM. Only screwed up once. Back to back races, lost track.

I prefer GP shift for the track, but that's because I pretty much never rode on the street.
 
  • Like
Reactions: Mee
I had track shifting on my track bike and street shifting on my street bike. I even had different track bikes with different shifting. I am NOT the most physically gifted/agile person on the planet by any means and I didn't have a problem with it. I missed shift or two every track day and occasionally on the street. I wasn't speedy or aggressive enough to have it be an issue. I rode in the B group a few times, but preferred to sand-bag it a little in the C's and work on stuff without worrying about holding people up.

The only benefit is if you have low bike (like the Ducati Monster) and you can't hang off much (I'm pretty small/short, so I probably erroneously felt I needed to lean over more.) I've tracked my Monster 900, FZR 400, R6, and Ducati 748. The only bike I really felt that benefitted from the lever switch was the Monster. But then again, I rode out there with some dude who showed up for 2 hours straight off the street on his Monster, rockin' an Aerostich and probably a milk crate strapped to the back, and he was running circles around a bunch of us with no change to his lever.
 
Last edited:
GP shift on all race bikes and most street(able) bikes. A few of the classic ones won't flip. If you're going to move to GP shifting (which is easier for me as well), make sure all the track bikes are GP at the least. You should be able to afford mis-shifting a street bike on the street as you're not moving as rapidly/ riding as intensely. Should you screw up, there's a safety margin there. Additionally, you have time to think about your shifts and get the right in a mellower environment like the street. You're most apt to go the wrong direction on your first shift coming off a corner into a straightaway where more shifting happens.

I've only missed shifts on track in non-GP bikes doing magazine tests and riding organizer/ school bikes. Pretty rare, though. I just focus on thinking about the shifts when I know it's a standard setup.
 
Last edited:
In my misspent youth, I worked as a motorcycle mechanic on mostly Japanese motorcycles with up for up shifting. That includes a thousand or so bikes of all sizes and shapes. All of my bikes are standard also. It's the muscle memory thing for me. I don't have to think about which way to shift. I do remember entering the freeway on a Norton with down for up shifting on the right side, and blowing from third back to second and sliding the back wheel. OOPS.
 
You should be able to afford mis-shifting a street bike on the street as you're not moving as rapidly/ riding as intensely. Should you screw up, there's a safety margin there. Additionally, you have time to think about your shifts and get the right in a mellower environment like the street. You're most apt to go the wrong direction on your first shift coming off a corner into a straightaway where more shifting happens.

In theory yes, but it is still very fluid and shit happens where you need to react quickly so for me I would want the muscle memory to overule having to think about which way the shifter is suppose to go.
 
I my experience, reverse shifting was only needed on short banded two stroke bikes. When I started to race four strokes, reverse shifting was not needed since the power band is so much wider. Keeps it simpler especially if you ride dirt bikes with the standard shift pattern. Shifting should be an unconscious effort, that way you can focus more on drifting the rear out of the corner:)
 
In theory yes, but it is still very fluid and shit happens where you need to react quickly so for me I would want the muscle memory to overule having to think about which way the shifter is suppose to go.

Solid point Bud.

...that way you can focus more on drifting the rear out of the corner:)

You OG Racers put us current racer crop to shame...!!!
 
The muscle-memory thing is real. I tried GP on the track and “standard” on my street bikes. Bottom line, I’d screw up shifts on all my bikes.

Based on the way I ride and the addition of quick shifters, I’ve found that I like GP shift better and converted all my street bikes to GP.
 
Shifting should be an unconscious effort, that way you can focus more on drifting the rear out of the corner:)

Spoken like a true bad ass! :thumbup

The muscle-memory thing is real.

Agree 100%. Practice makes perfect saying is for a reason.
On a moto when shit happens fast your subconscious is SO much more superior in making quick adjustments. Muscle memory = a well trained subconscious.
 
the more bikes you ride that are "both" pattern the better you get at not screwing up!
I've now got GP shift & non-GP shift bikes in the garage and I put a little sticker as a reminder in the cockpit incase I "forget".
each pattern has it's benefits... the faster the bike the more I lean towards GP shift pattern as it's much easier to push the shifter down when the "thing" is trying to rip your arms off down a straight away!
modern bikes with a "slipper clutch" are kinder on your mistakes... incase of a inadvertent "back shift"!
 
Last edited:
I would like to know why some sort of heel and toe shifter can't be used like they put on the big cruisers. Has anyone ever tried something like that on a track bike?

The heel part wouldn't have to be a huge pedal, just big enough to catch about half an inch to make that shift in the turn.

I don't like anything messing with my decades of muscle memory. That's why I wouldn't take advantage of a quick shifter either, since my left hand just automatically does what it needs to with the clutch without conscious thought. And I'm talking non-track usage here - no need for me to gain a fraction of a second.

I really want to know why heel and toe isn't an option.
 
I don’t really know the answer, but it seems to me that on a standard or sporting bike, a heel shifter would either be in the way or be too hard to reach, depending on adjustment. Taking a sport bike for example, the range of motion is limited in the calf, as it’s typically pretty stretched.
 
Heel/ toe shifters that I've seen on cruisers have the pivot point at the center of the shift plate. On a current rearset, the peg provides a base to position body weight using your foot. I don't see how you'd be able to use a heel to down shift effectively on an entry anyway, with forces pushing your body forward, among other functional problems I see.
 
Hmmm, I took my time before switching my track bike to GP shift. The benefit I see ( for me) is mainly on the straights and being able to just bang gears with QS. I do miss being able to tap a down shift when setting up a fast corner vs having to hook my toe under the shifter and clutch a down shift (sadly no blipper on my 07 gsxr).
I also have dirt bike with normal shift. But in reality I dont shift the dirt bike that much. :)
 
As others have noted, there are benefits, but switching back and forth is tricky at first and getting it wrong could be catastrophic.

That said, you really do get used to it with practice and being deliberate with your shifts isn't a bad thing, IMHO. Jump on the next bike, switch your brain to GP shift (or vice versa), use the warm-up lap (or first couple of street miles) to solidify it, and you're all set.

Plus, it's a great skill to have if you like to trade bikes with your friends or have to borrow somebody's "B" bike for a race or track day.
 
I'm late to the party but I personally found it incredibly dangerous to have bikes with opposite shifting. A few years ago, I had a R1M track bike and an Aprilia Caponord ETC ADV bike. My R1 was GP shift but my ADV bike couldn't be converted to GP. I rode the R1 the most, both on track and on the street. I rode the ADV bike quite a bit less, so my muscle memory was set to GP.
I ended up backing my ADV bike into the Caldecott Tunnel at >70 after selecting 2nd instead of 4th. I probably would have wrecked it but for its slipper clutch and was incredibly lucky not to get rear ended. So now I don't mix shift patterns.
My personal experience was that mis-shifting didn't happen when I was making a conscious switch and paying attention, it happened when I was relaxed, cruising along -when the muscle memory takes over.
 
I just did a trackday a few days ago after not doing one for 4 years. When I raced I had my race bike set up for GP shifting while my street bikes were all left standard. It took me about two laps to get into the GP shifting groove, and then I was set. What’s more is that whenever I got onto the track I automatically switched over to GP without thinking about it; and then went right back to normal shifting when I got back on my street bike at home.

I rented a bike at the recent trackday that was set up with normal shifting. I was on a track I hadn’t ridden before, so I was busy finding my line and not trying to push at all. Being on a strange bike also had its own set of challenges. The shifting was just one more thing about the day that was different, so I took it in my stride. Oddly, once I got the hang of the line and used to the bike I was able to start pushing my vision out, which helped me pick up the pace, which helped me relax - I was now in my comfort zone and starting to cruise. It was during the second session after lunch where I perhaps got a little too cruisy and accidentally downshifted instead of upshifting, activating the slipper clutch and causing the bike to rev pretty hard. I caught it right away and corrected my mistake with two quick upshifts.

I guess I learned that when I’m comfortable with the bike and track, I revert back to racer mode, GP shifting and all.

I do believe that having a race/track bike set up this way and having street bikes left in normal pattern is fine, but having one street bike set up GP and another set up normal wouldn’t work for me. I’m either on a track or I’m not - that would confuse me.
 
I just did a trackday a few days ago after not doing one for 4 years. When I raced I had my race bike set up for GP shifting while my street bikes were all left standard. It took me about two laps to get into the GP shifting groove, and then I was set. What’s more is that whenever I got onto the track I automatically switched over to GP without thinking about it; and then went right back to normal shifting when I got back on my street bike at home.

I rented a bike at the recent trackday that was set up with normal shifting. I was on a track I hadn’t ridden before, so I was busy finding my line and not trying to push at all. Being on a strange bike also had its own set of challenges. The shifting was just one more thing about the day that was different, so I took it in my stride. Oddly, once I got the hang of the line and used to the bike I was able to start pushing my vision out, which helped me pick up the pace, which helped me relax - I was now in my comfort zone and starting to cruise. It was during the second session after lunch where I perhaps got a little too cruisy and accidentally downshifted instead of upshifting, activating the slipper clutch and causing the bike to rev pretty hard. I caught it right away and corrected my mistake with two quick upshifts.

I guess I learned that when I’m comfortable with the bike and track, I revert back to racer mode, GP shifting and all.

I do believe that having a race/track bike set up this way and having street bikes left in normal pattern is fine, but having one street bike set up GP and another set up normal wouldn’t work for me. I’m either on a track or I’m not - that would confuse me.
I think you are onto something with track v street. I did 2 days at American SuperCamp, in Santa Rosa on Sunday and Monday - and immediately reverted to GP shift for the first session. :LOL: Which is weird because I haven't ridden GP shift in 10 months and have never ridden GP shift on dirt. However, I was in the "racers group" and all the side-bar conversations were about tracks and racing lines - so I must have had my racer head on lol.
 
Back
Top