cinelliguy
Guy
1981 Yamaha XS650 (750) Tracker
VIN #JYA4N900XBA016044
Engine# 4N9-016044
1980-1981 XS-H Special II USA “H” Heritage model
Price: $6000
This is not a show bike at this point but a really good looking solidly built street tracker. The tank and seat fairing are unpainted. For someone into trackers, this is a good value.
Build Sheet
Stock frame, de-tabbed and ceramic coated nickel color, tapered roller bearings in steering head, modified bronze swing arm bushings, custom made “boxed” adjustable swing arm
Custom rewiring, Shorai lithium ion battery
Omar's Street Tracker fiberglass tank (new), seat, tail fairing, fender eliminator (new)
2004 Yamaha R6 forks, shaved and polished, stock springs, Hagon road rear shocks with black springs
19” Buchanan Sun rims, Buchanan stainless spokes, polished XS front hub, Omar's 19” rear wheel conversion hub kit
Custom fabricated swing-arm to allow wider tires to be mounted
Tires are Golden Tyre GT257 27”X7”X19” (at least 5 years old)
Brembo 4-piston front, 2-piston rear with EBC rotors/pads, stainless lines
Sideways II handlebars
Banke Performance, custom design and fab pieces as follows: upper and lower triple, handlebar clamp, battery and Boyer engine control box, key ignition mount, left and right foot controls with integrated rear brake master, front and rear brake caliper mount, rear view mirrors, and headlight mounting arms. This is $$$
Engine build as follows Note – All new: lightened crankshaft - starter gear removed (kick start only), new bearings, new rods, 750cc big bore kit with 10.5:1 Wiseco pistons, valve job with new chain, EDCO head with street porting/polish, new valve guides, D&D springs and retainers, Megacycle 250-20 cam, EMPI valve adjusters, Ferodo clutch, Mikuni VM34 carbs jetted, Unifilters, custom intake manifolds, Omar's TT Mile Exhaust pipes (ceramic coated), Boyer coils/wires, new engine outer cases, valve covers and oil filter/high capacity cover
Some build photos here - https://www.flickr.com/photos/cinelliguy/albums/72157632919770346
Price $6000
I have a back issue and will not kick start the bike, so if you want to start it I will assist. No rides without cash in hand, typical. Clear registration but in paid in full non-op status.
Contact me via text at 408.836.5738
VIN #JYA4N900XBA016044
Engine# 4N9-016044
1980-1981 XS-H Special II USA “H” Heritage model
Price: $6000
This is not a show bike at this point but a really good looking solidly built street tracker. The tank and seat fairing are unpainted. For someone into trackers, this is a good value.
Build Sheet
Stock frame, de-tabbed and ceramic coated nickel color, tapered roller bearings in steering head, modified bronze swing arm bushings, custom made “boxed” adjustable swing arm
Custom rewiring, Shorai lithium ion battery
Omar's Street Tracker fiberglass tank (new), seat, tail fairing, fender eliminator (new)
2004 Yamaha R6 forks, shaved and polished, stock springs, Hagon road rear shocks with black springs
19” Buchanan Sun rims, Buchanan stainless spokes, polished XS front hub, Omar's 19” rear wheel conversion hub kit
Custom fabricated swing-arm to allow wider tires to be mounted
Tires are Golden Tyre GT257 27”X7”X19” (at least 5 years old)
Brembo 4-piston front, 2-piston rear with EBC rotors/pads, stainless lines
Sideways II handlebars
Banke Performance, custom design and fab pieces as follows: upper and lower triple, handlebar clamp, battery and Boyer engine control box, key ignition mount, left and right foot controls with integrated rear brake master, front and rear brake caliper mount, rear view mirrors, and headlight mounting arms. This is $$$
Engine build as follows Note – All new: lightened crankshaft - starter gear removed (kick start only), new bearings, new rods, 750cc big bore kit with 10.5:1 Wiseco pistons, valve job with new chain, EDCO head with street porting/polish, new valve guides, D&D springs and retainers, Megacycle 250-20 cam, EMPI valve adjusters, Ferodo clutch, Mikuni VM34 carbs jetted, Unifilters, custom intake manifolds, Omar's TT Mile Exhaust pipes (ceramic coated), Boyer coils/wires, new engine outer cases, valve covers and oil filter/high capacity cover
Some build photos here - https://www.flickr.com/photos/cinelliguy/albums/72157632919770346
Price $6000
I have a back issue and will not kick start the bike, so if you want to start it I will assist. No rides without cash in hand, typical. Clear registration but in paid in full non-op status.
Contact me via text at 408.836.5738