wots yer rpm at 70 mph indicated (and on which bike / sprockets?)

[GPzPop]

for curiosity's sake:

Whats your bike's (s') cruising rpm at an indicated 70 mph on the slab?

which model bike? any gearing changes?

(edited) if you have multiple steeds, you may answer in more than one category.

to start, me:
zzr600 +1 / -1 (yes, taller) 5800 rpm

 

[Chet]

SV650s +1/0 5000rpm.

 

[MrIncredible]

'88 R100GS-4K in fifth.

Driveshaft, so no sprockets.

 

[Aluisious]

Bout 5800 on stock 15/45 sprockets on my CBR600 F4.

 

[Schtum]

4,120 rpm. '09 BMW R1200GS.

 

[louemc]

Jesus...someone looks at their gauges?

 

[B-Cuz]

GPz, doood! Your statistical ranges overlap each other and are a research no no.

2k6 CBR600rr, 70mph=6000rpm exactly.

 

[Caddywumpus]

um... 3500-4k stock gearing 1125

 

[Spec-ECU]

Disregarding how much my speedo is off:

'02 Yamaha R1
effectively 4 down in the back (+1 front / -1 rear)*
mid-5000 rpm, maybe less at 70mph on the gauge



* 600's can actually stay with me at the start of front straights

 

[orbframe]

recalling from memory

all stock gearings, all for 6th gear

650R i believe is somewhere around 5500-5700 rpm at that speed. I know 80mph = 6000 rpm (break in procedures)

the HD is 2600rpm at 70 IIRC... and im pretty sure 80mph is 3000 in 6th

i'll abstain for the r6, im sure someone else will post for it. kind of a popular bike

 

[GPzPop]

'88 R100GS-4K in fifth.

Driveshaft, so no sprockets.

well then, final drive gear ratio ?

--S

 

[ls2alex]

Around 4k at 70 if i remember correctly. 04 r1

 

[MrIncredible]

well then, final drive gear ratio ?

--S

Don't know or care.

 

[Flying Pig]

I can reach 70 in first gear at very near redline if I'm not mistaken

 

[JO EBRMC]

um... 3500-4k stock gearing 1125

Thanks. I was trying to think but then realized the only time I ever looked was when I was crossing the dessert and I was doing 84 not 65.

 

[Velox]

Ninja 650R Is around 5.7K real 70, and around 5.1K fake (indicated) 70. Bone stock.

 

[DGS]

GS500e bout 6.5K with the stock gearing, though am going down a tooth in the front this week and will have to see how that changes things...

 

[PavelK313]

2003 954RR 185mph @12k rpm in 6th gear

 

[Diezel]

@ 70mph, roughly 3800rpm, 6th gear, stock gearing.

I can reach 70 in first gear at very near redline if I'm not mistaken

Hmmm lets see if I can remember this correctly.. I THINK my redline in first gear is someplace around 80-85mph (speedo indicated) would assume it to be around 75-80ish

 

[Albal0ney]

about 4k rpm, 6th gear. Of course 1st gear takes me to 70mph also