• There has been a recent cluster of spammers accessing BARFer accounts and posting spam. To safeguard your account, please consider changing your password. It would be even better to take the additional step of enabling 2 Factor Authentication (2FA) on your BARF account. Read more here.

Adventure riding short rides and BS thread

If you poke around ADVRider long enough you may find the thread where someone had done some reinforcements that looked pretty easy and stout.

Eric had our local guy (Dennis Etcheverry) weld some fish plate to his subframe and he's had no issues since. Of course, he's using the far-superior fancy high-tech cutting board rack hoseclamped to the top of the teensy stock rack so that might add to the robustness of the system :laughing

I did the same thing with the little mini-subrame bracket thingy under the fender of my 610 and it's been a trooper. Dennis basically welded another layer of aluminum all over it so it's twice as thick as before. No issues since :thumbup




WoodsChick
 
Eric had our local guy (Dennis Etcheverry) weld some fish plate to his subframe and he's had no issues since. Of course, he's using the far-superior fancy high-tech cutting board rack hoseclamped to the top of the teensy stock rack so that might add to the robustness of the system :laughing

I did the same thing with the little mini-subrame bracket thingy under the fender of my 610 and it's been a trooper. Dennis basically welded another layer of aluminum all over it so it's twice as thick as before. No issues since :thumbup




WoodsChick

Cutting board huh? Fancy, but too rich for my blood. I just made something up with some plywood I had sitting around. . . .
DSCF9806.JPG


And I've got some beefed up dirtbag racks on the sides to keep stuff out of the wheels/exhaust.
DSCF9807.JPG



zak
 
Coming to a Cross Roads and Passing the Point of No Return

This was a section from Jarbidge to Winnemucca NV on my last big ride when I went through NV, OR, and ID. I had planned the whole route out using a combination of Benchmark map books, Garmin Map Source, and Google Earth. There were a couple of times that the route went through private property, or in one case a road on an Indian Reservation that they didn't want white people on, and I had to figure out alternate routes, but for the most part the route had worked perfectly. This was the first time I had made tracks and followed them for such a big ride.

OwhyeeSep1002266.jpg



The Cross Roads. My route told me to go right on the less used road, but being as I knew gas was gonna be tight, I was on mile 130 and I had about a 240 mile range, I was wanting to go left and stay on the more developed road.


OwhyeeSep1002220.jpg



I finally choose to go right and follow the track on the less used road.


OwhyeeSep1002241.jpg



This was the only sign of human activity I saw for awhile.


OwhyeeSep1002225.jpg



I've done a lot of solo riding in remote places, but this time felt different. I knew I was really far away from the nearest help if anything went wrong and the road obvioulsy wasn't used much. I was actualy getting goose bumps and my mind was starting to go to worst case scenarios. At one point I got into a panic as the road seemed to end at a cattle watering station. After a bit of searching I found the route to continue in the direction I needed to go.


OwhyeeSep1002242.jpg



Finaly I crested a hill and saw a main dirt road! I still had many miles to go before reaching Winnemucca, but I was back on a real road finally.


OwhyeeSep1002249.jpg



I was so stoked to see this road maintained by the local mining comapny!


OwhyeeSep1002250.jpg



Anyway I'm not sure if there's anything to be learned from this story or if it's even a good one, but that feeling when I was out there thinking I might be getting myself into big trouble is something I think about a lot since. I've had people tell me I was crazy for riding through Death Valley solo. I wonder what they'd think if they knew about this ride? :laughing
 
Last edited:
Very cool Todd, thanks for posting. A topic that every solo traveler spends time pondering. On the one hand, I think Reinhold Messner said "Without the possibility of death, adventure is not possible." On the other hand, it's more crazy than adventurous to go off to the boonies without preparation.

I never really feel as prepared as I'd like in the desert. I'm pretty at home in the forest or the mountains, but I just haven't spent that much time in places like your pictures. Sometimes that feeling makes the experience more exciting, sometimes it limits what I'll allow myself to do while I'm out there.
 
At home sick today, so I spent some time working on panniers for my 640. It's got Dirtbagz racks on it, but I didn't really like the dirtbagz I had for my DRZ, so I'm trying out a small rolltop bag for the sides, and I'll use a duffel bag or drybag on the top rack.

Here's one of the side bags just about ready to sew up:
DSCF9824.JPG


Back view of a mostly finished bag:
DSCF9822.JPG

The fabric patch over on the right side is to go over a loop on the rack, the strap on the left side tightens to a loop up by the footpegs.

Front view:
DSCF9819.JPG


Still need to buy some 2" webbing for the over the seat straps, and then trim threads and straps. Not sure yet if I need something to add stiffness to the bags- I built a little aluminum heat shield to keep the left pannier away from the exhaust.

Nothing fancy, but that's kind of the point. I've had enough dust-clogged zippers and torn open pockets that I wanted something simple and easy to repair. These aren't going to be waterproof, so important stuff inside will be kept in drybags, or in the top bag.

zak
 
Finished.

Bravo, Slack! :thumbup Nicely done! Now you gotta take `em out and see how they do :) What did you use to stiffen them up on the backside?




WoodsChick
 
Bravo, Slack! :thumbup Nicely done! Now you gotta take `em out and see how they do :) What did you use to stiffen them up on the backside?




WoodsChick

I put in a piece of 1/8" acrylic in there right now, but I think I'll replace it with 1/4" plywood- the bag has sleeves for the stiffeners, and I'd like to use something that I can take out and use for table/cutting board when I'm at camp. Nothing too heavy though.

Should be putting them through their paces this weekend.
 
I wasn't at all impressed with Dirt Bagz myself. I broke the frame on my first big ride with them. Luckily it was the exhaust side, so it just hung on the pipe for the next 1000+ dirty miles. Those bags look cool though man... You might have a new pannier system to market for us cheap bastards!
 
I wasn't at all impressed with Dirt Bagz myself. I broke the frame on my first big ride with them. Luckily it was the exhaust side, so it just hung on the pipe for the next 1000+ dirty miles. Those bags look cool though man... You might have a new pannier system to market for us cheap bastards!

Interesting you should say that. . . . . My bike came with the right (non-exhaust) side bracket, but it was missing the left. I went over to a friends house, borrowed his welder, pipe bender, and skill, and made up the left side bracket. It looks like a dead ringer for the right side, but it's a heavier gauge steel tube, and the brackets are welded on plate, not just crimped tubes. So, hopefully it'll last a while.

You've got the gobi pannier racks on your bike, right? If that's anything like the 950 rack, it's beefy. Maybe I'll get around to making a set of these for my 950 as well, since I never use the Gobis.
 
I put in a piece of 1/8" acrylic in there right now, but I think I'll replace it with 1/4" plywood- the bag has sleeves for the stiffeners, and I'd like to use something that I can take out and use for table/cutting board when I'm at camp. Nothing too heavy though.

Should be putting them through their paces this weekend.

Smart! I mostly use my medium doggy panniers on my Husky, but when I use the large ones my little BBQ grill (slipped inside a padded mailing envelope) serves as the stiffener on the exhaust side. It's nice to carry something that will prove useful on the trip instead of dead weight :)

I admire your sewing skills and resourcefulness :thumbup




WoodsChick
 
Some pictures

Some pics from last weekend riding around in the sierras between Yosemite and King's Canyon.

DSCF9833.JPG


DSCF9838.JPG


DSCF9841.JPG


DSCF9843.JPG


DSCF9845.JPG


DSCF9848.JPG


DSCF9850.JPG


DSCF9854.JPG


DSCF9855.JPG


DSCF9865.JPG


DSCF9869.JPG
 
What a great time! :applause
 
What a great time! :applause

It was. Summer just doesn't want to start this year though.

Leaving tomorrow at the crack o' dawn to ride the 640 up to washington- won't have time for much dirt, but I always like riding through the oregon desert anyway. Hopefully it doesn't rain the whole way.

zak
 
It was. Summer just doesn't want to start this year though.

Leaving tomorrow at the crack o' dawn to ride the 640 up to washington- won't have time for much dirt, but I always like riding through the oregon desert anyway. Hopefully it doesn't rain the whole way.

zak

Wow! Thanks for the photos, Zak :) I love that area up there by Dinkey Creek. The bags are looking good, too. How'd they perform for you?

You're right about summer being late in arriving, as we got snowed on at least once a day during our Memorial Day week up on the Oregon/Nevada border. The 610 was grooving on the knobbies :teeth

Have fun and be safe on your way to WA. Are you going through Bend?
The central part of OR where you've got desert on one side and mountains on the other is really neat-o.




WoodsChick
 
Eric and I spent the Memorial Day week prowling the deserts up near the Nevada/Oregon border. We got snowed on more than I care to remember, but we were geared up and prepared so we had a fantastic time anyway :)

Nevada-OregonMay2011041.jpg


IMG_0054.jpg


The snow/rain never lasted too long so we had a chance to thaw out...
Nevada-OregonMay2011093.jpg


We found some new springs...
Nevada-OregonMay2011062.jpg


Nevada-OregonMay2011293.jpg


Nevada-OregonMay2011302.jpg


Nevada-OregonMay2011301.jpg


Nevada-OregonMay2011312.jpg


Nevada-OregonMay2011366.jpg



We ran into the drunken pilots again, much to our delight :party
Nevada-OregonMay2011279.jpg


We hit High Rock Canyon...
Nevada-OregonMay2011090.jpg


Nevada-OregonMay2011112.jpg


Nevada-OregonMay2011114.jpg


Nevada-OregonMay2011120.jpg


Nevada-OregonMay2011113.jpg


more...
 
Found some new cabins...
Nevada-OregonMay2011130.jpg


IMG_0008.jpg


Nevada-OregonMay2011123.jpg


Nevada-OregonMay2011252.jpg


Nevada-OregonMay2011241.jpg


Reached a new milestone of sorts...
Nevada-OregonMay2011229.jpg


Nevada-OregonMay2011231.jpg



And just had a great time in general...
Nevada-OregonMay2011327.jpg


Nevada-OregonMay2011165.jpg


Nevada-OregonMay2011196.jpg


Nevada-OregonMay2011334.jpg




Can't wait to go back in September :)
 
We heard they had delicious burritos at Toll House so went to investigate further.

P1000094019.jpg




8eb96cc0.jpg





P1000130055.jpg





P1000131056.jpg





Apparently, if you're a redneck from Tennessee, it's normal protocol to fire up the chainsaw at 8am to cut logs at the campground.

P1000135060.jpg





P1000147072.jpg





P1000151076.jpg







P1000157082.jpg






P1000163088.jpg






P1000170095.jpg
 
P1000224149.jpg






120fdc94.jpg





P1000253178.jpg






P1000254179.jpg







P1000257182.jpg







P1000256181.jpg






P1000262187.jpg






This crazy guy was flying his plane down the river canyon about 150ft above the water.

P1000265190.jpg






2670edfc.jpg






P1000272197.jpg
 
This is meant to be a general purpose adventure riding thread, a repository of random photos of rides not worthy of elaborate reports, a place to mention great rides that you didn't take any good pictures of, a place to get advice or give advice about camping, road conditions, gear, etc ...

baja1.jpg


... that time of year for me to be thinking of Baja ... usually
a winter trip for us ... :ride

Our camping spot east of the fish camp near Malarrimo on the Bahia de Sebastian Viscaino ... winter, early 2009 ...

baja2.jpg


Riding on the playa leaving Bahia San Hipolito …

baja3.jpg


… pumping tires for road out of Bahia Tortugus …

baja4.jpg


Our private cove on Punta Chivato …

baja5.jpg


… on the road to the San Rafael fish camp, south of Bahia de los Angeles …

baja6.jpg


… camping on the Sea of Cortez on the way to the San Rafael fish camp …

... hoping (and planning) to head back to Baja, soon ...
(just not wrenching on my bike ...) :laughing
 
Last edited:
Back
Top